I have only ENB and preset installed, turned off all mods. Temperature was on average 86C with the effects on and 71C with them off. Then 1950MHz with them disabled, but ENB still on. I am unsure exactly what to look for in GPU frequencies, but I got an average clock frequency of 1750MHz with the preset effects enabled. As soon as I turn on the effects from any preset (I tried a couple more) it goes straight to 56, stays there rarely increasing. I switched ‘UseEffect’ to ‘false’ and got 120~160FPS, rarely going below 120.
Unfortunately, I have tried pretty much everything in the time that has elapsed and still no solution. Thank you very much for the reply, it is excellent to get prompt help. Another thing, you can try tools to monitor frequencies of gpu and cpu, maybe something wrong with this, throttling or power management errors. When i had gtx1060 and faked 4k resolution by supersampling in skyrim le, performance was around the same, but that's for much slower videocard and with some issue of the le verison which makes any use of defer drop 20 fps each time, so your videocard should be much better performing. When you swapped presets but didnt get positive result, then should try delete files of previous preset, maybe some of them left, f.e.
#SKYRIM RESHADE VS ENB MOD#
As reference of performance UseEffect=false is what is maximum you can get with the mod installed, if it's still around 50 fps, then vsync. Often people use depth of field shaders in their presets which have abnormally high performance cost or set too high quality for ssao/ssil. If you are sure it's not syncing problem, turn off effects one by one till see which consume the most performance. But still worth to keep in mind this could be a culprit and only way to understand if it happens is by how fps behave, mostly stick to certain frame rate and jump down or up much higher at some camera angles or as usual in any game smoothly changes.
If required I can post my ini files or mod list for further detail.Īs i see you already tried to check if it's vsync issue. I am playing on 4k so it is taxing, but I think the system specifications is good enough to run with ENB at greater than 50FPS.
I tried looking to the sky at got an incrased framerate of 95~100 FPS. Nvidia GeForce RTX 3080 graphics card 11GB Vram
#SKYRIM RESHADE VS ENB PC#
I have in my mind a high end PC with these specifications: I am wondering if this is just because my system cannot handle it or I am doing something wrong. I tried a differnt preset, iiENB, and got the same result. I did the same with the Nvidia graphics control panel, and the Skyrimprefs.ini, disabiling VSync everywhere. First I went into the enblocal.ini and disabled framerate lock, as well as VSync. I have ready many posts about this and tried everything. I disabled all mods, and went into vanilla with only the ENB with said preset and SKSE, same result.
#SKYRIM RESHADE VS ENB INSTALL#
I decided to install an ENB and am using the Pi-cho preset. I've been playing modded Skyrim SE for a while now, regurarly getting 120FPS+ with my mods. Hello, I have been looking online for many solutions to my issue but so far no luck.
0 kommentar(er)
